N3 Display Graphics stays one step ahead

Print Solutions


Large format graphics production and installation company N3 Display Graphics recently used Drytac Polar Street FX aluminium print media to produce a range of eye catching outdoor floor graphics to promote social distancing across the city of Bristol.


Bristol City Council designed a series of 2 x 1.1 metre footprint style graphics for use in high traffic areas of the city ahead of non essential shops reopening in mid April.


The aim of the graphics was to encourage social distancing among shoppers when they were out and about on the high street, helping to limit any further spread of the virus. As such, Bristol City Council required an attractive design that would stand out under shoppers' feet.



The printed graphics also had to be safe for use underfoot. The council specified they should have a proper slip rating, meaning they were safe for use in busy areas that could be exposed to wet weather, including high streets and other retail settings


To meet these challenges, the council turned to N3 Display Graphics, a Bristol based company that specialises in large format graphics for both indoor and outdoor use. As a long time user of Drytac materials, N3 Display Graphics quickly identified Drytac Polar Street FX as the ideal solution for the project.


Polar Street FX is a PVC free, aluminium print media suitable for both outdoor floor and wall graphics, without the need for lamination. The slip resistant printable film can be applied to ground or wall surfaces such as brick, concrete, asphalt or any other low energy surfaces. Polar Street FX holds a ‘Low Slip Potential' 72 PTV according to the EN 13036-4 Pendulum Test. In the UK, the Health and Safety Executive (HSE) only recognises slip ratings based on the Pendulum Test Method.


N3 Display Graphics’ director Nigel Walker explained, ‘The council specified that we use aluminium backed slip rated material so Polar Street FX was the ideal choice for the job.’


Polar Street FX is printable with eco solvent, latex or UV technology, making it a flexible choice. For this project, the giant footprint graphics were printed on two HP Latex 360 printers, resulting in a series of creative graphics that have proved a huge hit with shoppers since being installed at the end of March 2021.


N3 Display Graphics cut the graphics into the curved footprint shape with its Zünd cutter with double edged tungsten blades, which was easily able to handle the strong wearing nature and toughness of the Polar Street FX aluminium backing.


Nigel continued, ‘After a month out on the streets, the graphics are all standing up well and are helping people to return to shopping safely.


‘The client was happy, Drytac was happy, and we were happy!’





Featured Posts
Recent Posts
Archive

Pickforde Lodge, Pickforde Lane

Ticehurst, East Sussex

TN5 7NB

United Kingdom

Contact

+44 (0) 1892 522563

©2019 BY EARTH ISLAND PUBLISHING. PROUDLY CREATED WITH WIX.COM